Documation card readers for sale

Mike Loewen mloewen at cpumagic.scol.pa.us
Wed Jun 17 21:27:06 CDT 2015


    I haven't replaced the rubber rollers on my M1000, yet.  They're still 
in good shape.

On Wed, 17 Jun 2015, COURYHOUSE at aol.com wrote:

> Mike  where  did  you  get new  rubber   roller things  for the  card
> reader?
> Thanks  for  the link on  the    interface.   Ed#   _www.smecc.org_
> (http://www.smecc.org)
>
>
>
> In a message dated 6/17/2015 7:21:15 P.M. US Mountain Standard Time,
> mloewen at cpumagic.scol.pa.us writes:
>
> On Wed,  17 Jun 2015, Kyle Owen wrote:
>
>> On Wed, Jun 17, 2015 at 7:14 PM,  John Ball <ball.of.john at gmail.com>
> wrote:
>>
>>> About six  months ago I struck a deal with a place down in California for
>>>  four Documation M1000's that I've been able to tell so far they all
> work
>>> but
>>> I really don't have space for more than  one.
>>
>>
>> If anyone here does get one, I've got a simple  Arduino UNO program that
>> interfaces to the parallel output and sends  fully decoded information
> over
>> USB at quite high speeds. The M-1000-L  is a great reader, very reliable,
>> and easy to work on too (I did a  little routine maintenance, but mine was
>> in 100% working shape when I  got it).
>>
>> Here's a video:  https://www.youtube.com/watch?v=N27Mr199I7g
>
> There's also  Brian Knittel's USB interface for the Documation  readers:
>
> http://media.ibm1130.org/sim/cardread.zip
>
> I built one, and it works well.
>
>
> Mike Loewen       mloewen at cpumagic.scol.pa.us
> Old  Technology                 http://q7.neurotica.com/Oldtech/
>
>

Mike Loewen				mloewen at cpumagic.scol.pa.us
Old Technology				http://q7.neurotica.com/Oldtech/


More information about the cctalk mailing list