NEW$:
R:THIS IS WHERE YOU PRESENT AN OVERVIEW OF THE MENU'S SCOPE AND PURPOSE.
T:This is the File and Disk Support menu, the one that you use to
T:prepare your media for use, protect your files from accidental
T:erasure, and duplicate files for backup.
T:
T:You can choose among the items on the list by typing a number
T:between zero and ten when the computer asks for your choice.  For
T:some choices, the computer may ask you for more information.
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
*MORE
T:
T:Do you want to know more about the "File and Disk Support" Menu?
U:*YORN
JN:*EXIT
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
R:THIS IS WHERE YOU PRESENT A COPY OF THE MENU DISPLAY - MAKE IT EXACT.
R:
T:                    0) File and Disk Support Functions 
T:
T:  1) Format a Program Disk               6) Copy a Systems Area only         
T:  2) Format a User Disk                  7) Disk Recovery and Repair        
T:  3) Select Default Disk and User        8) Write-Protect File(s)           
T:  4) Copy a File                         9) Write-Enable File(s)            
T:  5) Copy an entire disk                10) Extended Volume Table of Content 
T:
T:
T:
T:
T:
T:
T:
T:
*ASK
T:
T:Choose the function you want explained by typing its number (0-10):
A:#X
C:X=X+1
T:
T:

*MENU00
C:X=X-1
J(X):*MENU01
R:THIS IS WHERE YOU EXPLAIN FUNCTION 0
T:Function 0 returns to the "SUPERVYZ Function Selection" Menu.
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
J:*MORE

*MENU01
C:X=X-1
J(X):*MENU02
R:THIS IS WHERE YOU EXPLAIN FUNCTION 1
T:Function 1, "Format a Program Disk" creates a new system disk.  You
T:will be asked for the generic name and disk identifier.  These items
T:are used to make an empty file which serves as the disk's name.
T:
T:A new disk has nothing recorded on it.  In order to keep a record of
T:where it is reading or writing information on the disk, the disk
T:operating system needs to have the entire disk prerecorded in a
T:special pattern.  When you select function 1, the computer
T:records this pattern, then writes a directory, a copy of the
T:operating system and certain files which are needed for all system disks.
T:
T:NOTE: FORMATTING A DISK ERASES ALL INFORMATION ALREADY ON THE DISK.
T:
T:
T:
T:
T:
T:
J:*MORE

*MENU02
C:X=X-1
J(X):*MENU03
R:THIS IS WHERE YOU EXPLAIN FUNCTION 2
T:Function 2,"Format a User Disk", creates a data disk.  You will
T:be asked for the generic name and disk identifier.  These items
T:are used to make an empty file which serves as the disk's name.
T:
T:A new disk has nothing recorded on it.  In order to keep a record of
T:where it is reading or writing information on the disk, the disk
T:operating system needs to have the entire disk prerecorded in a
T:special pattern.  When you select function 2, the computer
T:records this pattern, then writes a copy of the operating
T:system on the disk.
T:
T:NOTE: FORMATTING A DISK ERASES ALL INFORMATION ALREADY ON THE DISK.
T:
T:
T:
T:
T:
T:
J:*MORE

*MENU03
C:X=X-1
J(X):*MENU04
R:THIS IS WHERE YOU EXPLAIN FUNCTION 3
T:Function 3, "Select Default Disk and User", is used to change where your
T:data is looked for, to change what data you are "logged into".
T:
T:Programs and data files normally may reside within any disk drive on the
T:system.  You therefore specify upon which drive the computer should look
T:for a program or data file.  It is necessary for the system to have a disk
T:which it considers "home base", a place to go whenever it is not told to do
T:otherwise.  This disk is the default disk.
T:
T:Every disk's Volume Table of Contents ("directory") may be subdivided
T:into sixteen separate and distinct sub-directories, or User Areas.  This
T:logical division of a directory allows private file space on public disks.
T:This function allows you to switch into another User Area.
T:
T:
T:
T:
T:
J:*MORE

*MENU04
C:X=X-1
J(X):*MENU05
R:THIS IS WHERE YOU EXPLAIN FUNCTION 4
T:Function 4, "Copy a file", allows you to copy one or more files,
T:either to the same disk using a new file name, or to a different
T:disk.
T:
T:Here are some timesaving ways to use Function 4 to copy multiple
T:files.  Look at the names of the files you need to copy, displayed
T:in the bottom third of the menu screen.  Each item has two parts
T:separated by a period, such as  "FILENAME.TYP". The part before
T:the period is called the name; the part after the period is the
T:type.  If the type is the same for most of the files you wish to  
T:copy, AND there are no undesired files with the same type, you can
T:copy them all at once by typing "*.TYP". That is type an asterisk
T:then a period then the desired type then "Return", "Enter" or "CR".
T:
T:By typing "FILENAME.*" you can copy all files beginning with "FILENAME".
T:
T:
T:
J:*MORE

*MENU05
C:X=X-1
J(X):*MENU06
R:THIS IS WHERE YOU EXPLAIN FUNCTION 5
T:Function 5, "Copy an entire disk", is the fastest way to replicate
T:("back-up") important disks.  It only works when both the disk
T:being copied ("source") and the disk being created ("destination")
T:have been formatted the same.  If your computer system supports
T:more than one disk density or format, make sure the two diskettes
T:are similar.  If the formats are not the same, use the "Copy a file"
T:function instead.
T:
T:NOTE: THE NEW COPY WILL HAVE ALL PREVIOUS FILES ERASED.
T:
T:
T:
T:
T:
T:
T:
T:
T:
J:*MORE

*MENU06
C:X=X-1
J(X):*MENU07
R:THIS IS WHERE YOU EXPLAIN FUNCTION 6
T:Function 6, "Copy a Systems Area only", transfers the operating
T:system portion of a diskette to another diskette.  This is needed
T:if the receiving disk is going to be a "System", or "Program", disk.
T:Whenever you receive a program disk from a software supplier, there
T:is not yet a copy of your operating system, specifiying what's in
T:your computer.  Use this function to write it there.
T:
T:This does not affect any data files or programs.  The file area
T:of a disk is not diminished by the presence or absence of an
T:operating system because the System Area is allocated when the
T:disk is formatted.
T:
T:
T:
T:
T:
T:
T:
J:*MORE

*MENU07
C:X=X-1
J(X):*MENU08
R:THIS IS WHERE YOU EXPLAIN FUNCTION 7
T:Function 7, "Disk Recovery and Repair", allows a programmer to
T:modify data stored on your disk.  This capability is both very
T:useful and extremely hazardous.  If you do not know what an FCB
T:looks like, and if you don't know what a Group-Cluster is, save
T:yourself some grief and stay away from this function.
T:
T:The DUMP22 program invoked by this function contains a list of its
T:commands.  If you "EDIT" a sector, you specify the address within
T:the sector where you want to begin making changes by entering a four-
T:digit address and then press "RETURN".  The current contents of that
T:address are displayed, and you may either enter a hexadecimal value
T:to replace the current value, you may press "RETURN" to leave it alone,
T:or you may enter a period (".") followed by "RETURN" to end substitution.
T:
T:To stop editing a sector, enter the command "WRITE" to update the disk
T:or "STOP" to leave the disk unaffected.
T:
T:
J:*MORE

*MENU08
C:X=X-1
J(X):*MENU09
R:THIS IS WHERE YOU EXPLAIN FUNCTION 8
T:Function 8, "Write-Protect File(s)", writes special information
T:about the files you specify, telling the operating system that
T:those files are not to be erased or written.  This can prevent
T:inadvertant erasure of valuable data, but it also prevents you
T:from making changes to the write-protected files.  Should you need
T:to remove or modify protected files, use the "Write-Enable"
T:function on them first.
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
J:*MORE

*MENU09
C:X=X-1
J(X):*MENU10
R:THIS IS WHERE YOU EXPLAIN FUNCTION 9
T:Function 9, "Write-Enable File(s)", removes the special data
T:that prevents the operating system from erasing and updating
T:certain files.
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
J:*MORE

*MENU10
C:X=X-1
J(X):*ASK
R:THIS IS WHERE YOU EXPLAIN FUNCTION 10
T:Function 10, "Extended Volume Table of Content", tells you about
T:programs and files on a disk.  In addition to the file size and
T:whether the file is Read-Only and if it is hidden from view, it
T:lets you to look at all the User Areas at the same time.
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
J:*MORE

*YORN
T:Type "Y" for yes or "N" for no; then press "Return", "CR", or "Enter":
A:
M:Y,N
JN:*YORN
M:Y
E:
*EXIT
BYE:
