NEW$:
R:YOU MUST KEEP THE NUMBER OF TYPE STATEMENTS ("T:") THE SAME AS THEY ARE NOW.
R:
R:THIS IS WHERE YOU PRESENT AN OVERVIEW OF THE MENU'S SCOPE AND PURPOSE.
T:This is the Data Communications Processing Menu, the one that enables you to
T:send and receive data betweeen your computer and another system.  Depending
T:upon the option you select, your computer can appear as an intelligent
T:terminal to another system or it can communicate as an "equal" to another
T:micro-computer.
T:
T:You can choose among the items on the list by typing a number
T:between zero and ten when the computer asks for your choice.  For
T:some choices, the computer may ask you for more information.
T:
T:
T:
T:
T:
T:
T:
T:
T:
*MORE
T:
T:Do you want to know more about the "Data Communications" Menu?
U:*YORN
JN:*EXIT
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
R:THIS IS WHERE YOU PRESENT A COPY OF THE MENU DISPLAY - MAKE IT EXACT.
R:
T:                    0) Data Communications Processing
T:
T:  1) Set Up RDR:/PUN: For Remote Xfer    6)
T:  2) Set Up Console For Remote Xfer      7)
T:  3) Receive A File Via Remote Xfer      8)
T:  4) Send A File Via Remote Xfer         9)
T:  5) Explain How To Set Up For Xfer     10)
T:
T:
T:
T:
T:
T:
T:
T:
*ASK
T:
T:Choose the function you want explained by typing its number (0-10):
A:#X
C:X=X+1
T:
T:

*MENU00
C:X=X-1
J(X):*MENU01
R:THIS IS WHERE YOU EXPLAIN FUNCTION 0
T:Function 0 returns control to the next higher menu.
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
J:*MORE

*MENU01
C:X=X-1
J(X):*MENU02
R:THIS IS WHERE YOU EXPLAIN FUNCTION 1
T:Function 1, "Set Up RDR:/PUN: For Remote Xfer", makes it possible
T:for this computer to send or receive data with another computer that
T:has the same set-up performed on it.  This function modifies PIP.COM, a
T:program that is supplied with Digital Research's CP/M operating system.
T:
T:This modification causes data to be sent and received by the logical
T:Reader (RDR:) and Punch (PUN:), which are not normally paper tape devices
T:but are instead a modem for communications to other computer systems. Not
T:all manufacturers have implemented the RDR:/PUN: within the operating
T:system; if this computer does not have these logical devices activated
T:then you must use the Console (CON:) for sending and receiving files and
T:therefore the "Set Up Console" function is appropriate.
T:
T:
T:
T:
T:
T:
J:*MORE

*MENU02
C:X=X-1
J(X):*MENU03
R:THIS IS WHERE YOU EXPLAIN FUNCTION 2
T:Function 2, "Set Up Console For Remote Xfer", makes it possible for
T:this computer to send or receive data with another computer that has
T:the same set-up performed on it.  This function modifies PIP.COM, a
T:program that is supplied with Digital Research's CP/M operating system.
T:
T:This modification causes data to be sent and received by the logical
T:Console (CON:), the same cable that you use for your terminal.  Some
T:manufacturers have implemented a modem as the RDR:/PUN: within the
T:operating system; if this computer has these logical devices activated
T:then you should use the Reader/Punch for sending and receiving files and
T:therefore the "Set Up RDR:/PUN:" function is appropriate.
T:
T:
T:
T:
T:
T:
T:
J:*MORE

*MENU03
C:X=X-1
J(X):*MENU04
R:THIS IS WHERE YOU EXPLAIN FUNCTION 3
T:Function 3, "Receive A File Via Remote Xfer", asks for the File Name,
T:File Type, and Disk Drive of a file to be received from another computer
T:that has been "Set Up RDR:/PUN:" or "Set Up Console" for remote transfers.
T:
T:The disk onto which the file is being received must not be write-protected
T:and there must be at least three (3) times as much room available on the
T:disk as the incoming file requires.  The File Type being received may not
T:be "HEX", as this type is used in the receipt process (rename HEX files
T:after receiving them).
T:
T:You must have "Set Up RDR:/PUN:" or "Set Up Console" prior to performing
T:this function.  If you had to "Set Up Console" then unplug your terminal
T:and attach the modem after the screen has cleared, the disks activate,
T:and the cursor moves down a line on your screen;  detach the modem and
T:reattach your terminal after the disks have reactivated.
T:
T:
T:
J:*MORE

*MENU04
C:X=X-1
J(X):*MENU05
R:THIS IS WHERE YOU EXPLAIN FUNCTION 4
T:Function 4, "Send A File Via Remote Xfer", asks for the File Name, File
T:Type, and Disk Drive of a file to be sent to another computer that has
T:been "Set Up RDR:/PUN:" or "Set Up Console" for remote transfers.
T:
T:The File Type being sent must not be "HEX", as this type is used in the
T:transmission process (rename HEX files prior to sending them).
T:
T:You must have "Set Up RDR:/PUN:" or "Set Up Console" prior to performing
T:this function.  If you had to "Set Up Console" then unplug your terminal
T:and attach the modem after the screen has cleared, the disks activate,
T:and the cursor moves down a line on your screen;  detach the modem and
T:reattach your terminal after the disks have reactivated.
T:
T:
T:
T:
T:
T:
J:*MORE

*MENU05
C:X=X-1
J(X):*MENU06
R:THIS IS WHERE YOU EXPLAIN FUNCTION 5
T:Function 5, "Explain How To Set Up For Xfer", displays the text to an
T:article describing how the transfer functions within this menu ("Xfer")
T:operate.  If you have MicroPro's WordStar wordprocessing package, you
T:can print this text (PIPIO.DOC).  Feel free to disseminate this text
T:as it is released to the public domain for non-commercial use, courtesy
T:of Steven Fisher CDP and Epic Computer Corporation.
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
J:*MORE

*MENU06
C:X=X-1
J(X):*MENU07
R:THIS IS WHERE YOU EXPLAIN FUNCTION 6
T:Function 6 is available for you to implement.
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
J:*MORE

*MENU07
C:X=X-1
J(X):*MENU08
R:THIS IS WHERE YOU EXPLAIN FUNCTION 7
T:Function 7 is available for you to implement.
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
J:*MORE

*MENU08
C:X=X-1
J(X):*MENU09
R:THIS IS WHERE YOU EXPLAIN FUNCTION 8
T:Function 8 is available for you to implement.
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
J:*MORE

*MENU09
C:X=X-1
J(X):*MENU10
R:THIS IS WHERE YOU EXPLAIN FUNCTION 9
T:Function 9 is available for you to implement.
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
J:*MORE

*MENU10
C:X=X-1
J(X):*ASK
R:THIS IS WHERE YOU EXPLAIN FUNCTION 10
T:Function 10 is available for you to implement.
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
T:
J:*MORE

*YORN
T:Type "Y" for yes or "N" for no; then press "Return", "CR", or "Enter":
A:
M:Y,N
JN:*YORN
M:Y
E:
*EXIT
BYE:
